Operator Manual
Aspect ISO-Drive
L100-3265 Rev. A
2
The text of this manual was originally written, approved and published by the manufacturer in English.
OVERVIEW
This manual pertains to the specified devices only and does not intend to replace or substitute for certified
training in the application of this equipment. The device is intended for qualified medical personnel who
have been trained in the use of medical equipment.
Functional capabilities and operation of the equipment described herein can be employed in a variety of
diagnostic, therapeutic, and surgical applications. The device is designed for use as either a fluoroscopic or
radiographic table.
OWNER RESPONSIBILITIES
The owner of this device is responsible to ensure system compatibility, the qualifications of the operator and
maintenance personnel. The operator must be properly trained and have obtained credentials from the
appropriate authorities.
This equipment must be installed in an area provided with the proper electrical power.
The owner of this device is responsible for verifying continued compliance with all applicable regulations
and standards. Consult local, state, federal and/or international agencies regarding specific requirements and
regulations applicable to the use of this equipment.
Image Diagnostics, Inc. certifies only the equipment. After-sale operating practices and safety are the
responsibility of the owner and operator. Image Diagnostics, Inc. assumes no liability or responsibility for
after-sale operating or safety practices; nor can it be responsible for personal injury or damage resulting from
misuse.
Never make modifications or adjustments to the equipment unless directed by a qualified Image Diagnostics
representative. This equipment, when properly assembled, meets US federal regulations and international
standards. Unauthorized modifications to the equipment may impact adherence to these standards and make
the equipment unsafe to operate.
CUSTOMER SUPPORT
Image Diagnostics will make available, on request, circuit diagrams, component part lists, calibration
instructions, or other information which will assist the user’s appropriately qualified technical personnel to
repair those parts of equipment which are designated by the manufacturer as repairable.
For technical assistance, call IDI at (978) 829-0009. Be prepared to give the complete model and serial
number found on the data plate on the table base at the time of contact.
This X-ray component manufactured by Image Diagnostics, Inc. complies with applicable FDA performance
standards contained in 21CFR at date of manufacture.
