Operator Manual
Aspect ISO-Drive
L100-3265 Rev. A
11
6.
EMERGENCY STOP PUSHBUTTON
➢
The red Emergency Stop Pushbutton is located in the center of the
base cover on the back of the table.
➢
Pressing this button until it is fully engaged will stop all motorized
movement by removing power from all system components.
• ACTIVATE: Engage the emergency stop mode by pressing the button.
• RESET: Restore the electrical functions by rotating the button a quarter turn.
7.
SETUP INSTRUCTIONS & PATIENT PREPARATION
7.1.
Installation
•
Hand operated controls for the movement of the tabletop are included with the table.
The operator should become familiar with the controls before using them.
•
External electrical power connection and disconnection is through the AC power
cord and outlet. The table will operate on 110 V~, 230 V~ or on internal battery
backup power. When external electrical power is applied to the actuators which
control the movement of the tabletop, the green LEDs on the Handset Control will
illuminate.
•
The electrical power outlet used should be visible and accessible to the user. The
electrical power cord should be routed where it will not be subject to damage or be
a tripping hazard.
WARNING!
To avoid electric shock, plug the electrical power cord
into a properly grounded hospital grade outlet!
EMERGENCY
STOP
PUSHBUTTON
PEDESTAL END OF
TABLETOP
IMAGING END OF TABLETOP
