Operator Manual
Aspect ISO-Drive
L100-3265 Rev. A
17
9.3.
Patient Restraint Straps.
The Patient Restraint Straps can be used in
two different ways depending on where the
strap is to be located along the length of the
Table Top. If the strap is to be used on the
end of the table that has the two long
accessory rails, then the whole strap drapes
over the Table Top, hangs down between
the rails and the tabletop and wrapped over
the outside of the rails to meet over the top
of the table. If the strap is to be used along
the rest of the tabletop, slide the strap over
the end of the table with the thin part of the
strap over the Table Top and the thicker
part under the tabletop. The ends of the
strap meet over the top of the table and
connect with hook and loop fasteners.
9.4.
Arm Comfort Strap.
A strap is provided to rest the arms of the patient for their comfort. This strap is passed
through the slot at the head end of the tabletop, exposed beyond the Head Positioner, using the
hook and loop to size the strap appropriately the patient can rest their arms either above or
below the facial recess of the tabletop.
WARNING!
Strap configuration is recommended; however, patient
restraint is a case-by-case condition. Please refer to
the facility’s policy on
restraining a patient.
