Not-INt-05 Janvier 2021 (Version 1.0)
10
battery power gauge
After turn on the power, the battery power
gauge is working. The battery power gauge
also shows the battery remaining power
capacity.
As the picture shown, the battery power is
full.
When there is only the red or yellow LED light lit, the battery should
be charged. And for a long distance driving, the battery should be fully
charged. If only the red LED light is lit, the battery power is extremely
inadequate, users need to charge battery as soon as possible.
Use of joystick
The wheelchair moving direction is controlled
by joystick. The moving extent of joystick also
controls the moving speed.
Please turn on or turn off the power
when the joystick is in the middle
position. Otherwise, the controller will
let out wrong operation signal.
Release the joystick to middle and this mistake will stop. If the mistake
is continuing, perhaps this part is malfunction, do not use it and contact
with your dealer for maintenance.
cArE AnD mAInTEnAncE
Failure to care for and monitor your product may result in the risk
of serious injury.
Maintenance of wheelchair includes clean wheelchair, check wheel and
battery, and charge battery. For further maintenance, please contact with
your dealer. Our suggestion is checking the wheelchair every half year,
annually overhaul.
clean and battery maintenance
cLEAn WhEELchAIr
Please clean the wheelchair regularly.
Clean the parts, which are frequently touched with user’s body (such as
set cushion, armrest, controller) by a clean and slight wet cloth. Do not
use organic solvents to clean.
If it is a patient user, the wheelchair should be cleaned once per week. If
the wheelchair is used by an infectious victim, it should be cleaned and
disinfected by disinfectants.
WhEELs
Check the tires’ air pressure and their wear condition regularly. When the
tire tread pattern depth reduces to 1mm, please replace new tire.
bATTEry
To make sure that the battery is fully charged frequently. In order to
prolong battery life, we strongly recommend users do not to charge until
battery run out of power totally.
WhEELchAIr mALFUncTIon AnD chEckIng
When malfunctions happen during the wheelchair is working, please turn
off the power before check.
Symptom: completely lose power, and all the LED lights on the controller
panel are off.
check step :
Step 1: To check if the controller’s plug is loose.
Step 2: To check if the connection of controller’s plug and battery box is
loose. Please reinsert the plug connector (hold the plug when pull out
the plug. Do not pull the wire to avoid unnecessary damage to the wire
line). After above checking, if the wheelchair is still not able to restore the
power, or if users have any question for above checking, please connect
with your dealer.
The controller has a diagnosing system to monitor the controller
and motor. Any malfunction of these parts is indicated by the
controller. For more details, please kindly refer to chapter of audio
signal indication.
maintenance checking
The following is a checking list. Electric wheelchair should be ordinal
checked according to our suggestion. When you get on or get off the
wheelchair, some self checking is done automatically. For more your
attention, we particularly list these self-checking items in A area.
repair and reform
If the repair and modification is necessary, please contact your dealer. Do
not modify by yourself, it may lead to accident or malfunction.
Do not replace parts or material randomly.
Do not add weight randomly, in case to cause imbalance.
Do not use other vehicle to pull or push the wheelchair when somebody
sits on the wheelchair or the wheelchair is in manual mode.
When there is abnormal sound, contact service immediately.
chAngE oF oWnErshIp
The product can be reused. It must first be cleaned and disinfected in
accordance with hygiene instructions. When transferring the product,
remember to hand over all the necessary technical documents to the
new user. Beforehand, the product must be inspected by an authorised
specialist.
rEcycLIng
When the product has become unusable and you have to throw it away:
please contact your specialist dealer. If you wish to carry out recycling
for yourself, ask your local waste management company for disposal
guidelines.
sTorAgE
Failure to observe the storage conditions may lead to deterioration
of the product and thus to the risk of serious injury.
Do not store your product for an extended period of time near a heat
•
source or in the sun (e.g. behind a window or near a radiator) or near
a cold source.
Keep away from all flames and sources of sparks.
•
Observe the conditions for storing and stowing your product:
•
In a dry and temperate place. Do not storage wheelchair in damp
-
condition, such as near-by bathroom. If wheelchair got wet in the
rain, wipe the water immediately.
Protect your product by packaging it from dust, corrosion (e.g.
-
abrasive elements, sand, sea water, salty air).
Store all removed parts together in the same place (or locate them
-
if necessary) to avoid mixing them with other products when
reassembling.
All components must be stored without any load (do not place any
-
objects that are too heavy on the product elements, do not jam
anything...).
protection from electromagnetic interference
The wheelchair should away from strong magnetic fields and large
inductive electrical equipment, such as radio station, TV station,
underground radio station, cell phone transmitting radio station. Pay
attention to that if there are sources of electromagnetic interference
nearby, as far as away from those sources to avoid electromagnetic
interference. The electric wheelchair should avoid electromagnetic
interference.
TEchnIcAL spEcIFIcATIons
Overall dimensions
Width. 67 cm x Depth. 105 cm x Height
94 cm
Seat dimensions
Width 45 cm x Depth. 42 cm x Height
43 cm
Seat Width
45 cm
Seat Depth
42 cm
Floor to seat Height
51 cm
Backrest Height
43 cm
