IDEC WB1F Series, Руководство пользователя

Страница: 6 / 116

2. Installation & wiring 3. Functions 4. Support tool 5. Appendix 1. Overview
v
SAFETY PRECAUTATIONS
SAFETY PRECAUTATIONS
z
Before installing and wiring this product, operating it, or performing maintenance and inspection, please read this
manual carefully and use the product correctly.
z
The degree of possible danger that may occur if the product is mishandled is classified as "Warning" and "Caution".
The meaning of each is as follows.
Warning Warning
Warning notices are used to emphasize that improper operation may cause severe personal in-
jury or death.
Caution Caution
Caution notices are used where inattention might cause personal injury or damage to equip-
ment.
Safety precautions
Warning Warning
z
This product is not designed for use in medical equipment, nuclear power, railways, aircraft,
passenger vehicle equipment, or similar applications requiring a high degree of reliability and
safety. Do not use the product for these applications.
z
When using this product in a system that may impact human life, such as in the management
of chemicals, take the utmost care with a redundant design and safety design so that there is
no possibility of impacting human life when data is mistaken.
z
Do not modify, disassemble, or repair this product. There is a risk of serious accidents such as
electric shock, damage, fire, malfunction, and other heave accident.
z
When using this product in situations where it is not built into other equipment, do not use
an integrated power supply. Otherwise there is a risk of fire or electric shock.
z
Do not directly look at the reading window (red transparent section) or expose any person to
it while the LED is illuminated (performing reading operation). There is a risk of danger to the
eyes.
z
This product is for general electronic equipment. Do not use it for applications where there is
a direct threat to the body or to human life due to malfunction or failure.
z
Always turn off the power supply before wiring, maintaining, and inspecting the product.
Otherwise there is a risk of electric shock or failure.