IDEC WB1F Series, Руководство пользователя

Страница: 37 / 116

2. Installation & wiring Function 4. Support tool 5. Appendix 1. Overview
3-14
Slave mode
z
Additional information table
Item
Additional
information
examples
Comments
Global prefix ^ A prefix can be added to all output data. A maximum of 8 characters can be added.
Local prefix P0
A prefix can be added to each type of barcode. A maximum of 4 characters can be
added.
Data size 123
Adds the size of the output data in bytes.
This value is expressed as a 3-digit decimal number which is not zero suppressed.
Elapsed time 12:34:56
Adds the elapsed time in HH:MM:SS format since you turn on the power to the unit.
(When the power is reset, the time is reset to "00:00:00". The time is reset to 00:00:00
after 23:59:59.)
AIM ID ]E0 Adds the AIM ID of the readout data Adds "]--" when reading fails.
Label direction
D=F
Adds the label direction of the readout data
This is expressed as F when forward and R when reversed.
"D=" to indicate the label direction can also be added before "F" and "R".
Label direction: F (forward) Label direction: R (reverse)
Barcode length
N=032
Adds the length of the readout data
This value is expressed as a 3-digit decimal number which is not zero suppressed.
"N=" to indicate the length can also be added before the value.
Matching result
<OK:000>
Adds the matched or not matched judgment result during matching.
When matched, the OK characters and the number xxx (3-digit numeric value) of the
matched reference data is added.
When matched with sequential input reference data, "<OK:255>" is added. When no
match, "<NG--->" is added.
This is not added except matching.
Number of
decoding times
DC=0004
Adds the number of decoding times required to complete a reading.
Only single label read decoding times are added.
Local suffix
S0
A suffix can be added to each type of barcode. A maximum of 4 characters can be
added.
Check digit 12
Adds the check digit. This value is expressed as a 2-digit hexadecimal number.
For the calculation method, refer to
F
P. 5-10 "5. 6 Check digit calculation method" .
Global suffix CR LF A suffix can be added to all output data. A maximum of 8 characters can be added.