IDEC SmartAXIS Touch FT1A Series, Руководство пользователя

Страница: 842 / 1232

3 Recipe Settings Dialog Box
18-10
SmartAXIS Touch User’s Manual
3.2 Individual Settings Dialog Box
Use the Individual Settings dialog box to register or edit the recipe settings for the selected channel.
●
Block Tab
The Block tab is used to configure settings that are managed by blocks such as the save destination for the data for
the recipe to use, the Recipe function operation, and the trigger setting.
■
Access to
Selects the save destination for data for the recipe to use when writing values to devices.
■
File Name
Enter the file name of the recipe file to save on the external memory.
The default is “RCP
n
.CSV”. (
n
: four digit sequential number)
To change the file name, enter a new file name. The maximum number is 120 characters (including the extension).
If there is a recipe file with the same file name on the external memory, the existing file is overwritten with the new
file.
■
Trigger Setting
Selects the operation using the data for the recipe.
External Memory: Uses a recipe file saved to the external memory.
Requires an external memory with a saved recipe file. For details, refer to “4.2 Creating Recipe
Files” on page 18-17.
Internal Memory: Uses recipe data saved to internal memory.
Since recipe data is handled as a portion of project data, it may put pressure on the volume of
project data that can be downloaded. One item of recipe data uses two bytes when the top
device data type is 16 bits and it uses four bytes when the top device data type is 32 bits.
Example: When the top device data type is 16 bits and using one block of 16 channels of recipe
data with a data amount of 10
2 x 10 x 1 x 16 = 320 bytes
When the top device data type is 32 bits and using 64 blocks of 16 channels of recipe
data with a data amount of 100
4 x 100 x 64 x 16 = 409.6 kilobytes
Read/Write: Saves values of batch read devices to the external memory as a recipe file and writes them
to devices as recipe values.
This option can only be configured when
External Memory is selected under Access to .
Read-only: Saves values of batch read devices to the external memory as a recipe file.
This option can only be configured when
External Memory is selected under Access to .
Write-only: Writes recipe values to devices.