62
HS5E-K Interlock Switches with Key
Actuator Dimensions and Mounting Hole Layouts
Straight Actuator (HS9Z-A51)
(Note) Actuator Stop
(supplied with the actuator)
26
15
32.4
28
20
2.2
4-R
10
0.8
5.2
(6)
6.2
6.4
2
2-M4 Screw
Actuator Mounting Hole Layout
(Straight, Right-angle)
20
Right-angle Actuator (HS9Z-A52)
15
Actuator Stop (supplied with the actuator) (Note)
Actuator Cover
2
2- ø4.4
20
33
30
28
0.8
4.5
2
7.2
7.2
1.6
All dimensions in mm .
Straight Actuator (with Rubber Bushings)
(HS9Z-A51A)
30
7.3
43.8
15.3
15
2-
ø
4.3
2
12
0.8
(20)
0.8
2-
ø
10
2-
ø
9
When mounted (5
)
Ve
rtical Swin
g
Washer (supplied with the switch)
Rubber Bushing
Actuator Stop (Note)
· The mounting center distance is set to 12 mm
at the factory. When a distance of 20 mm
distance is required, adjust the distance by
moving the rubber bushing sideways.
· The actuator has flexibility to the direction
indicated by the arrows. When 20-mm distance
is selected, the actuator swings vertically.
Right-angle Actuator (with Rubber Bushings)
(HS9Z-A52A)
30
15
15.8
8.5
0.8
2
0.8
When mounted (11.2)
When mounted (39.7)
When mounted (5)
2-ø9
2-ø10
Vertical
Swing
Horizontal Swing
2-ø4.3
12
(20)
Actuator Stop (Plastic) (Note)
(supplied with the actuator)
Rubber Bushing
Washer (supplied with
the actuator)
· When the mounting center distance is set
to 12 mm the actuator has flexibility both
vertically and horizontally.
· When the mounting center distance is set
to 20 mm, the actuator swings vertically.
Adjust the distance by moving the rubber
bushings.
Note: The actuator stop film and actuator stop are supplied with the actuator
and used when adjusting the actuator position . Remove after the
actuator position is determined .
Angle Adjustable Actuator (Vertical) (HS9Z-A53)
Actuator Stop
Film (supplied
with the actuator)
Door Hinge Side
20
5
R3.2
72
58
44
33 max.
12
(21)
1
20°
29
Angle Adjustment
(M3 hexagon socket
head bolt)
58
2-M6 Screw
Actuator Mounting Hole Layout
(Vertical Swing)
18
Angle Adjustable Actuator (Horizontal/Vertical)
(HS9Z-A55)
Orienting
Insert
Orienting
Insert
Actuator Stop (Note)
Angle Adjustment
(M3 Hexagon Socket Head Screw)
Actuator Stop (Note)
Angle Adjustable Screw
(M3 Hexagon Socket Head Screw)
(M4 Socket)
Vertical Adjustment
Horizontal Adjustment
49
15
7
18.5
29
3
3.6
1
R2.1
23
26
38
38
0.8
2
20°
20°
2-M4 Screw
Actuator Mounting Hole Layout
(Horizontal/Vertical)
Actuator Orientation
The orientation of actuator swing (horizontal/vertical) can be changed using the orienting insert (white plastic) installed on the back of the
actuator . Do not lose the orienting insert, otherwise the actuator will not operate properly .
12
2-M4 Screw
Actuator Mounting Hole Layout
Straight actuator (with rubber bushing)
Right-angle actuator (with rubber bushing)
∗
Mounting centers can be widened to
20 mm by moving the rubber bushings.
