background image

C H A P T E R

 

1-1

Cisco Nexus 5000 Series Hardware Installation Guide

 

1

Overview

This chapter provides an overview of the Cisco Nexus 5000 Series switches, which include the Cisco 
Nexus 5000 Platform switches and the Cisco Nexus 5500 Platform switches. The overview of each of 
these switches includes information on the expansion modules, power supplies, and fan modules that you 
can include with them.

This chapter includes the following sections:

Cisco Nexus 5500 Platform Switches, page 1-1

Cisco Nexus 5000 Platform Switches, page 1-29

Cisco Nexus 5500 Platform Switches

The Cisco Nexus 5500 Platform supports the following application scenarios, many of which require the 
installation of other products:

As an access-layer switch, it can be used purely as a 1- and 10-Gigabit Ethernet switch, 
consolidating 10 Gigabit Ethernet connections into a smaller number of server connections trunked 
to the aggregation layer.

As a smaller-scale aggregation switch, it can be used as a Layer 3 1- and 10-Gigabit Ethernet switch, 
consolidating multiple 1- and 10-Gigabit Ethernet connections from a data center access layer.

In conjunction with the Cisco Nexus 2248T GE Ethernet Fabric Extender, the Cisco Nexus 5500 
Platform can be a high-density 1-Gigabit Ethernet switching system, consolidating more than 900 
Gigabit Ethernet connections within a single management plane.

In conjunction with the Cisco Nexus 2232T 10GE Fabric Extender, it can be a high-density 
switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single 
management plane.

In conjunction with the Cisco Nexus 2224TM 10GE Fabric Extender, it can be a high-density 
switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single 
management plane

As a rack-level I/O consolidation platform, the switch carries Ethernet traffic from servers to the 
aggregation layer and carries FC traffic to existing Fibre Channel SANs.

As a crucial element in data center I/O consolidation, the switch enables I/O consolidation at the 
access layer and provides interoperability with the Cisco Nexus 5500 Platform and other 
standards-based products.

This section describes the Cisco Nexus 5500 Platform switches and contains these sections:

Cisco Nexus 5596UP Switch, page 1-2

Содержание C-series Nexus 5010





















































Отзывы: