Ideal Heating EVOMAX 2, Руководство пользователя

Страница: 6 / 48

6
3.1 Glossary
3.1.1 M e n u f u n c t i o n r e s o u r c e
definitions
• Plant – related to the master or
standalone boiler for plant control
(common) functions
• Boiler – only related to an individual boiler
and only used by that boiler
• Heating Circuit – only related to an
individual heating circuit
• DHW circuit – only related to an individual
DHW circuit
3.1.2 Pump definitions
• System pump – used to circulate water
through the Heating and/or Domestic
Hot Water circuits as well as either the
boiler or the secondary side of a Low
Loss Header or Plate Heat Exchanger.
• Shared boiler pump – used to only
circulate water through more than one
boiler
• Shunt pump – used to circulate an
amount of water between flow and return
to limit the temperature differential
• Boiler pump – used to only circulate water
through a single boiler
• HC pump – a pump or valve that allows
flow through a Heating Cicruit
• DHW pump – a pump or valve that allow
flow through a Domestic Hot Water circuit
3.2 Introduction
Once the boilers are installed and configured
there are still a number of functions available
for the overall system Settings, the Status of
the Boilers, Heating Circuits, and Cascade.
The status screens of each boiler in the
cascade are the same, they show the same
information in relation to the boiler, and each
slave will show the following screen:
< Boiler Name & Model No. >
Operation: Standby
Boiler Setp.: 0%
Boiler cap.: 0%
Flow temp.: 40.2ºC
The Master will show the same except for
a small left pointing chevron in the top left
hand corner, this is indicating that there is a
second status screen access by turning the
knob anticlockwise:
< Boiler Name & Model No. >
Operation: Standby
Boiler Setp.: 0%
Boiler cap.: 0%
Flow temp.: 40.2ºC
On the Master boiler in the cascade there
is an additional status screen which gives
information in relation to the system, on
rotating the knob anticlockwise:
< Boiler Name & Model No. >
Operation: Standby
Plant Setp.: 0%
Plant cap.: 0%
Header: 40.2ºC
The chevron will now be right pointing
and appear on the top right hand corner,
indicating that there is another status screen
accessed by rotating the knob clockwise. In
this case back to the Boiler status screen.
If any boiler faults exist, there will be another
right pointing chevron on the boiler status
screen. For boiler specific faults refer to the
Boiler User guide.
3.3 Menu
When any of the buttons are pressed or
the knob rotated the display backlight will
brighten up from its standby reduced level.
To select the menu, press the ‘Select’ button,
the menu will appear:
Menu
Configuration
Boiler Menu
Plant
The menu can be scrolled down and contains
the following items:
Menu
Configuration
Boiler Menu
Plant
Heating circuits
Menu
Boiler Menu
Plant
Heating circuits
DHW
Menu
Plant
Heating circuits
DHW
Cascade
Menu
Heating circuits
DHW
Cascade
Menu
DHW
Cascade
Note: Slave boilers do not have the Cascade
menu option.
3.4 Menu - Configuration
The configuration menu has the following
options, there are other options but these
are hidden from the User/Installer:
Configuration
General
3.4.1 Menu - Configuration – General
The General menu has the following options:
General
Language
Date
Time
General
Language
Date
Time
Access level
General
Date
Time
Access level
General
Time
Access level