Ideal Heating EVOMAX 2, Руководство пользователя

Страница: 19 / 48

19
3.7.16 Menu – Heating Circuit –
Settings – Frost protection
Heating circuit frost protection operation can
be triggered by a number of measured real
time values:
Frost protection
Flow temperature
Outside temperature
Room temperature
Each of these has a trigger set point and a
hysteresis value above which the function
is once again deactivated. E.g. Room
temperature, if the actual room temperature
drops below the temperature setpoint value
then Heating Circuit will create a demand into
the system. It will only remove this demand
once the actual room temperature has risen
above this value, plus the hysteresis setting.
Room temperature
Temperature
Hysteresis
Temperature
6ºC
Hysteresis
2ºC
3.7.17 Menu – Heating Circuit –Time
clock
Each heating circuit can have its own
individual time programme. Refer to the
Plant section for guidance on how this is set.
3.7.18 Menu – Heating circuit –
Holiday programme
Each heating circuit can have its own
individual holiday programmes. Refer to the
Plant section for guidance on how this is set.
3.8 Menu – DHW
DHW
Status
Operating mode
Tank temperature
DHW
Status
Operating mode
Tank temperature
Settings
DHW
Operating mode
Tank temperature
Settings
Time clock
DHW
Tank temperature
Settings
Time clock
Holiday program
DHW
Settings
Time clock
Holiday program
DHW
Time clock
Holiday program
3.8.1 Menu – DHW - Status
The status sub menu give you access to see
the current real time values of the Dometic
Hot Water circuits.
The status menu has the following options:
Status
Summary
Real time values
3.8.2 Menu – DHW – Status - Summary
The summary sub menu lists the configured
Dometic Hot Water circuits that are
configured and can be selected, which then
shows the main values for the Domestic Hot
Water circuit.
Summary
DHW1 Boiler 1
DHW1Boiler 1
Status: Standby
Tank temperature: 21.1ºC
Flow setpoint: 23.0ºC
Pump speed: 0 %
3.8.3 Menu – DHW – Status – Real
time values
The Real time values menu has the following
options:
Real time values
Demand inputs
Sensors
Outputs
Real time values
Inputs
Sensors
Outputs
Real time values
Sensors
Outputs
3.8.4 Menu – DHW – Status – Real time
values – Demand inputs
Once inputs is selected the screen will show
the configured list of Domestic Hot Water
circuits:
Demand inputs
DHW1 Boiler 1
Once a DHW circuit is selected, then the
following screen will display the current
Real time values for the configured Inputs,
once again items that are not configured will
be shown with no value but with 2 dashes
to indicate this, the list can be scrolled if
required to show all values:
DHW1 Boiler 1
SL2: On
OT1: - -
Tank setpoint: 8ºC
DHW1 Boiler 1
SL2: On
OT1: - -
Tank setpoint: 8ºC
Flow setpoint: 8ºC
DHW1 Boiler 1
OT1: - -
Tank setpoint: 8ºC
Flow setpoint: 8ºC
DHW1 Boiler 1
Tank setpoint: 8ºC
Flow setpoint: 8ºC