background image

1

MARS

QUADCOPTER OPERATOR’S MANUAL

The Mars is Idea-Fly’s next-generation easy-to-use GPS-equipped 350mm quadcopter. The Mars features an 

all-new high-power motor system with quick disconnect self-locking propellers. The battery compartment is large 

and fits 3S LiPo batteries up to 6400mAh capacity (sold separately) for long flight times. Available in both Standard 

and FPV (First Person View) versions, both versions include an MC6 2.4GHz 6-channel DSS transmitter and a 2-axis 

brushless camera gimbal. In addition, the FPV version includes a 5.8GHz video transmitter and a color 4.3” LCD FPV 

monitor with receiver and antenna. Just add an Idea-Fly WiFi Sports Cam 1080P, a GoPro HERO 3, a Boscam HD19 

or other similar action camera, and you’re ready to shoot smooth high-quality video or enjoy First Person View flying 

fun! After familiarizing yourself with the basics of your new Mars series quadcopter, you’ll be ready to use the Mars’ 

high-tech functions, like the GPS Flight Mode and the Return to Home function, in addition to programming your 

quadcopter to ensure the best flight performance for the current flight conditions.

It’s very important that you read through all of the information included with your quadcopter and fully 

understand not only how to operate your quadcopter, but also to fully understand the responsibility you have 

for its proper use - both for your safety and the safety of others.

Operator’s Manual

MARS

Next-Generation GPS Quadcopter

If you have any questions about setting up or flying your quadcopter after you’ve read this Operator’s Manual and 

viewed the included How-To videos, please contact the Authorized Hobby People/Affiliates service department 

using the information in the Service and Support section on page 3 before trying to fly your new quadcopter.

*Camera Not Included

Содержание MARS









































Отзывы: