maestro.idatalink.com
Automotive Data Solutions Inc. © 2014
10
KEN-RR(SR)-FOR01-DS-OG-EN
CHANGING THE SETTINGS
HOW TO GET THERE:
CHANGING THE
SETTINGS
(Continued)
GAUGES SETTINGS
These settings can be accessed as shown here
or by pressing the Settings button on the Gauges
screen.
Select Gauges
Used to assign gauges to the gauges screen.
See the Gauges section of this guide for more
details.
Gauges Global Units
Changes the units of all gauges to Metric or English system. However, the units of each
gauge can be set individually in the settings option for that gauge.
Validate PIDs (Parameter Identifi ers)
Queries the factory system to determine which gauges can be supported. This is done upon
automatically when the module powers up. It is only required to be done manually if the
module has been re-fl ashed.
OBD2 COMMUNICATION
Auto Disable (default)
The module will communicate with the vehicle’s OBD2 system unless it detects another
device. This may be a scan tool or aftermarket programmer connected to the vehicle.
Always Enabled
The module will communicate with the vehicle’s OBD2 system even when a scan tool or
aftermarket programmer is connected. However, some scan tools and aftermarket
programmers will not function when this option is enabled.
Disabled
The module will not communicate with the vehicle’s OBD2 system. This option applies when
using a scan tool or aftermarket programmer that does not allow multiple connections at
the same time.
Enabled on Demand
The module will only communicate with the vehicle’s OBD2 system when the vehicle info or
gauges screen is displayed. This is used in vehicles that issue a periodic vehicle health report
through a factory system such as Sync or OnStar. However, applying this setting may cause
the fuel economy calculations to be inaccurate.
Center Gauge Warning Text
Allows the choice of displaying text when the center gauge reaches its peak.
Содержание maestro Rr ADS-RR-FOR01-DS-IG-EN
Страница 62: ...ACCESSOIAES connee ACCESSORIES...
Страница 63: ......