iDataLink maestro Rr ADS-RR-FOR01-DS-IG-EN, Инструкция по установке

Страница: 59 / 63

maestro.idatalink.com Automotive Data Solutions Inc. © 2014
9
KEN-RR(SR)-FOR01-DS-OG-EN
CHANGING THE SETTINGS
CHANGING THE
SETTINGS
VEHICLE INFO SETTINGS
These settings can be accessed as shown here
or by pressing the Settings button on the Vehicle
Info screen.
Tire Alert
Enables the vehicle info screen to be displayed
automatically when a TPMS fault is detected
(only if TPMS is available in the vehicle).
Check Engine Alert
Enables the Vehicle Info screen to be displayed automatically when the check engine light
turns ON in the vehicle. The diagnostic codes can be read and cleared.
Door Alert
Enables the Vehicle Info screen to be displayed automatically if a door is opened or left open
when the vehicle speed exceeds 5 mph or 8 km/h.
Clear DTCs (Diagnostic Trouble Codes)
This button will only be highlighted if the check engine light in the vehicle is ON. This item
will clear the light.
Warning: If the check engine light turns On after using this setting, it may indicate serious
problems with the engine. Have the vehicle serviced by a qualifi ed technician.
Amp Settings
Used to adjust the gain of the vehicle’s amplifi er and set speed compensated volume.
Rear seat Audio Controls
Turn the rear controls, and headphones ON and OFF.
MAESTRO SETTINGS
About Maestro
Displays infomation about the Maestro module
and the fi rmware it has been programmed with.
Module Audio Gain
Used to adjust the audio gain of the Maestro
module. All audio that passes from the factory
systems into the Maestro module will be affected
by this setting.
Module Master Reset
Used to reset the Maestro module.
HOW TO GET THERE: