iDataLink maestro Rr ADS-RR-FOR01-DS-IG-EN, Инструкция по установке

Страница: 53 / 63

maestro.idatalink.com Automotive Data Solutions Inc. © 2014
3
KEN-RR(SR)-FOR01-DS-OG-EN
USIING YOUR STEERING WHEEL CONTROLS
USING YOUR
STEERING WHEEL
CONTROLS
(If equipped)
Your steering wheel buttons can be used to control your aftermarket Kenwood radio.
You can assign steering wheel buttons to Kenwood radio functions. Simply program your
Maestro RR module online using the Weblink updater and customize your buttons. Each
steering wheel button can control up to two radio features.
PRINT YOUR QUICK REFERENCE CARD
You can print a quick reference card showing your confi guration on the Maestro website. If
you had your product installed professionally, ask your installer to print this card for you.
RETAINING SYNC
When Maestro is programmed to retain Sync, some of the steering wheel buttons will work
differently. These two buttons cannot be re-confi gured. For steering wheel button operation
when Sync is retained, see table below.
Pressing and releasing the Voice button on the steering wheel controls will change the radio
source to the last used Sync source (if you are not already using Sync) and activate the Sync
voice prompt. At this point, you can say a command, such as “Line in” or “USB”, and Sync
will play audio from the connected device. Consult your vehicle manuals for available voice
commands.
Pressing and holding the Voice button will activate the Sync Phone voice prompt. You can
then say a command, such as “Dial Home”. After you are done using the phone, the radio will
return to the source you were listening to before you pressed the Voice button.
Steering Wheel
Buttons
Press and Release Press and Hold References
Phone menu, answer call Hang up call Vehicle Owner’s Guide
Sync voice prompt Sync phone prompt Vehicle Owner’s Guide