iDataLink maestro Rr ADS-RR-FOR01-DS-IG-EN, Инструкция по установке

Страница: 54 / 63

maestro.idatalink.com Automotive Data Solutions Inc. © 2014
4
KEN-RR(SR)-FOR01-DS-OG-EN
USING YOUR FACTORY SYSTEMS
USING YOUR
FACTORY
SYSTEMS
The following section explains how to access and operate the factory systems that have
been retained. Your vehicle must already be equipped with these systems.
FACTORY SYSTEMS
The Maestro Rr module retains your factory system functionalities with your new Kenwood
radio. In order for them to be functional, these features must be retained during the Maestro
Rr online programming with the Weblink Updater. Up to four source buttons will be available
in the My Car menu depending on the factory systems in the vehicle.
SYNC PHONE
When installing a Kenwood radio with Bluetooth into a vehicle with Sync, there will be two
hands-free systems in installed in the vehicle at the same time. Only one hands-free telephone
system should be used to make telephone calls. If you choose to use Sync for hands-free
calling, OEM Bluetooth needs to be turned ON, in the initial settings in the Kenwood. This
setting can also be changed in the source setup menu.
If you choose to use Sync for phone calls, your phone must be paired to the Sync system. A
setting in the radio will disable the hands-free telephone portion of the Kenwood Bluetooth
system. You may then pair your phone with the Kenwood Bluetooth, but only for audio
streaming. Once a phone is paired with both Bluetooth systems, it is possible to use either
the Kenwood radio or Sync for Bluetooth streaming, but only Sync can be used for hands-free
calls. If you choose to use the Kenwood Bluetooth for phone calls, OEM Bluetooth must be
turned OFF and you should delete any pairing with Sync. The Kenwood provided microphone
will be used for phone calls.
To pair a phone to the Sync system, enter the Sync Phone source within the My Ford menu.
Selecting the settings icon in the Sync Phone menu will allow you to see a list of paired
devices, as well as walk you through the process of pairing a new device, connecting a paired
phone, or deleting a device. By pressing the “Advanced” button, you can change sync phone
settings (ex: ringer and auto answer).
HOW TO GET THERE: