Woody-Pod Instructions
Thank you for purchasing a pod from Vangear. For more information please visit
Please check for damages and report them within 48 hours of receiving the unit. Please
keep the original packaging in case you need to return the unit.
We appreciate any feedback about our units. We would also appreciate any photos or videos
of your unit in your van that we could use on Facebook and social media.
e-mail us at: [email protected]
https://www.facebook.com/vangearcampervanunits/
https://www.instagram.com/vangear/
See video at
- Packed in 2 boxes for easy transportation
- Easy 3 part assembly
A. On a level table fit the end panel into the main body with 5 flange screws
B. 1. Fit the Bamboo top onto the pod and fix with 2 x 35mm screws from the underside.
2. Fit the base into the pod with 4 x 35mm screws.
3. First remove the aluminium angle from the shelf and then fit the shelf into the pod. Fix the
shelf with 2 screws (35mm) to the left underside, 2 screws ( 35mm and cups) to the rear of the
pod. Refit the aluminium angle ( 2 self tapping screws) and then use one additional self tapping
screw to support the shelf at the top front ( do not over tighten this screw)
C. Fit your pod into your van with bolts or anchor cleats using the floor mounting slots.
Fit the water bottles into your pod with the waste connection and fit the water hose onto
your tap ( always charge your tap first )
Summary of Contents for Woody-Pod
Page 2: ......
