WF-2000 Series AIO
User’s Manual (Ver. 1.2, May./2014) ------------- 41
b. To access the WF-2000 I/O module user can double click the
module listed in "Device List".
Figure
4-10 WF-2000 search list
c. Then you will see the I/O page come out. In the I/O page, it is
used to access I/O data and configure parameters.
Figure
4-11 I/O page interface(WF-2026)
02
、
Connection with Modbus TCP utility
a. Open Modbus TCP utility and key in the IP address as
"192.168.255.1", Port as "502". Finally, click the "Connect"
button.
b. If the network settings are correct, this will immediately
establish a connection.
Figure
4-12 Modbus TCP utility Connection interface
