WF-2000 Series AIO
User’s Manual (Ver. 1.2, May./2014) ------------- 36
4. Application Notes
Users can use a computer to communicate with the WF-2000 devices
in the application. It can complete the purpose of I/O control to wireless
network by this way.
Figure
4-1 WF-2000 application architecture
4.1 Hardware Installation
Before use, associated hardware configuration, the steps described as
follows
：
Step 1: Checking the WF-2000 series firmware operation mode
It needs to set the DIP switch to the "OP" position (operating mode),
as resetting the power, WF-2000 series will be in the operation mode.
Step 2: Serial port connection
WF-2000 series supports RS-232 serial communication. The circuit
configuration is as shown in Figure 2-19.
