ICP DAS USA UA-5200 Series, Руководство пользователя

Страница: 147 / 233

UA-5200 Series User Manual V4.3 ICP DAS
147
6.3. Modbus ASCII (Master)
This setting is for UA Controller connecting the remote Modbus ASCII Slave module.
This page is for setting the communication values with the connected modules. First
choose the serial port that connected with the module, and each module can give a name
(Default name: Name). Click [ ] button could add a new module, and then click [Edit]
button to configure the module content and the Modbus mapping table.
Setting Steps:
1. Select the module connecting Serial port
2. Give the module name or nickname, e.g. Example2. Default: Name
3. Click the button [ ] to add a new module
4. Click the button [Edit] to enter the Module Content Setting page
5. Set up the Modbus Mapping Table for the UA controller and module I/O channels
2. Give a name, ex: Example2
3. Click to add
1. Select the connecting serial port
4. Click to set the module content