ICP DAS USA tM Series, Руководство пользователя

Страница: 38 / 144

General Command Sets
Command Response Description
Section
%AANNTTCCFF !AA Sets the Module Configuration
2.1
#** No Response Synchronized Sampling
2.2
#AA00(Data) > Sets the Digital Output
2.3
#AA0A(Data) > Sets the Digital Output
2.4
#AA0B(Data) > Sets the Digital Output
2.5
#AA1cDD > Sets the Digital Output
2.6
#AAAcDD > Sets the Digital Output
2.7
#AABcDD > Sets the Digital Output.
2.8
#AAN !AA(Data) Reads the Digital Input Counter
2.9
$AA2 !AANNTTCCFF Reads the Module Configuration
2.10
$AA4 !S(Data) Reads the Synchronized Data
2.11
$AA5 !AAS Reads the Reset Status
2.12
$AA6 !(Data) Reads the Digital I/O Status
2.13
$AAC !AA Clears the Latched DI Status
2.14
$AACN !AA Clears the Digital InputCounter
2.15
$AAF !AA(Data) Reads the firmware Version
2.16
$AALS !(Data) Reads the Latched DI Status
2.17
$AAM !AA(Data) Reads the Module Name
2.18
$AAP !AASC Reads the communication protocol
2.19
$AAPN !AA Sets the communication protocol
2.20
@AA >(Data) Reads the Digital I/O Status
2.21
@AA(Data) > Sets the Digital Output Channels
2.22
~AAO(Name) !AA Sets the Module Name
2.23
Host Watchdog Command Sets
Command Response Description
Section
~** No Response Host OK
2.24
~AA0 !AASS Reads the Status
2.25
~AA1 !AA Resets the Status
2.26
~AA2 !AAVV Reads the Timeout Settings
2.27
~AA3EVV !AA Sets the Timeout Settings
2.28
~AA4V !AA(Data) Reads the PowerOn/Safe Value
2.29
~AA5V !AA Sets the PowerOn/Safe Value
2.30
tM Series DIO User Manual, Rev: A1.3 7PH-013-A13 38
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru