ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
190
Figure10-36 :
PUE Setting Page(2)
ix
Click on “OK” to confirm the setting and leave the setting page.
x
Repeat steps i~ix to complete settings of all PUE setting.
xi
To modify the settings of a pre-set PUE, please click on the radio button
in front of the PUE, and then click on “Setting” to modify the settings.
xii
To copy the settings of a pre-set PUE to the new PUE, please click the
radio button in front of the pre-set PUE and then click “Copy”, a new
PUE (in sequence) will be added to the list and the settings of the old
PUE will be copied to this newly added PUE.
xiii
To remove a pre-set PUE, please click the radio button in front of the
pre-set PUE and then click “Remove”.
xiv
After all PUE settings are completed, click “Save” button to save the
changes.
