ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
215
statement; the editing page for Internal Register Condition Setting is
shown as follow:
Figure11-24 :
Internal register condition setting page
Follow the steps below:
i
Select the Internal Register that you are going to use the value as
evaluation criteria for IF condition statement. Specify the Internal
Register Index from the dropdown list of “No.” field.
ii
Set up the expression statement for this Internal Register value.
Select an operator from “=”,”>”,”<”,”>=” or “<=”.
iii
And then specify the evaluation value. If this Internal Register value
match the evaluation criteria, the result of this condition evaluation
will be “true”.
iv
PMC/PMD provides 12 value options; you can compare them with
the Input Register value for condition evaluation. Please refer to
“
” section for more detailed information.
v
Click “OK” button to confirm the settings and return to the Rule
settings page.
11.1.15
PUE
PUE value can be used as evaluation criteria for IF condition statement;
the editing page for PUE Condition Setting is shown as follow:
Figure11-25 :
PUE condition setting page
Follow the steps below:
ii
Select the PUE that you are going to use the value as evaluation
criteria for IF condition statement. Specify the PUE Index from the
