![background image](http://html1.mh-extra.com/html/icp-das-usa/isagraf-pac-series/isagraf-pac-series_getting-started_3826573017.webp)
Getting Started:
PAC-5007/5107/5207/5307 Ver. 1.1, 12/2011 ICP DAS
.
2-1
Chapter 2.
Software Programming
2.1 Step 1 – Installing ISaGRAF Software
There are two kinds of software to be installed in PC before user can program on the
PAC-5x07 PAC system. They are:
A. ISaGRAF Workbench and
B. ICP DAS Utilities for ISaGRAF
User has to purchase at least one pcs. of ISaGRAF workbench Version 3 (ISaGRAF-256) to
install on his PC to edit, download, monitor & debug the controller system. Item (B) is
free and it is burned inside the CD-ROM which is delivered with the
PAC-5x07.
Operating System Requirements:
Before you install the “ISaGRAF Workbench” software, you must install one of the
following operating system:
Windows 95 / Windows 98 / Windows 2000
Windows NT Version 3.51 or Windows NT Version 4.0
Windows XP, Vista or Windows 7
(Please refer to
www.icpdas.com > FAQ > Software > ISaGRAF Ver.3 (Chinese)
Steps to Install the ISaGRAF Workbench:
1.
Insert the ISaGRAF Workbench CD into your CD-ROM drive.
If your computer does not auto-start the installation, use the Windows Explorer and
go to the CD-ROM drive where the Workbench CD is installed.
2.
Double-click on the "install.bat" file listed on the ISaGRAF CD.
If the "install.bat" file is not found on your ISaGRAF CD, then double-click on the
"ISaGRAF.exe" file to start the installation process.
Select the language.
Recommend to use “English” because
this manual uses English version.