![background image](http://html1.mh-extra.com/html/icp-das-usa/isagraf-pac-series/isagraf-pac-series_getting-started_3826573056.webp)
4-11
.
Getting Started:
PAC-5007/5107/5207/5307 Ver. 1.1, 12/2011 ICP DAS
Finally, click the “output coil” to the right side of LD program and click the “F5 (Coil)”
twice to add two “coil” under the first one.
Now we are ready to specify the variables. Double-click the outside of "CYCLE" and the
“Select variable” window appears. Select the "Timer" and then specify the variable as
"TMR1".
Double-click the first “Contact” (Normal Open, as shown below). In "Select Variable"
window, select “Boolean” and then specify the variable as “SW1”.
1.
2.
3.
1.
2.
3.
1.
2.