![background image](http://html1.mh-extra.com/html/icp-das-usa/isagraf-pac-series/isagraf-pac-series_getting-started_3826573040.webp)
3-20
Getting Started:
PAC-5007/5107/5207/5307 Ver. 1.1, 12/2011 ICP DAS
3.
Now, you can set the Address, Baud rate and Checksum. After configuration, you
must
click “Setting” to save the settings.
4.
You have completed the setting; please adjust the DIP Switch to “OFF” position and
restart the power. Finally, you can serch the module again to comfirm settings.
Note:
Remember to remove the wire between INIT* and GND, then restart the power if you
use the I-7000 I/O module.
3.
Follow the steps to
comfirm the settings.