![background image](http://html1.mh-extra.com/html/icp-das-usa/isagraf-pac-series/isagraf-pac-series_getting-started_3826573029.webp)
Getting Started:
PAC-5007/5107/5207/5307 Ver. 1.1, 12/2011 ICP DAS
.
3-9
3.6 Set Baud Rate for COM1
Related Files & Hardware Connection:
(We use
μPAC-5307
as an example)
1.
Create a file folder named "μPAC-5307" in your hard drive. (Ex. "c:\ μPAC-5307")
2.
Copy the following listed files under “μPAC-5307” folder:
CD:
\Napdos\ISaGRAF\μPAC-5000\Driver\5307\1.00\
3.
Run "7188xw.exe" in your “μPAC-5307” folder.
4.
Link COM1 or COM2 of your PC to COM1 of the PAC through a RS-232 cable.
If your computer has no COM1/COM2 or you use other COM (like COM5) to link the
μPAC-5307, you can change the “C number” in the first line of “7188xw.ini” file.
EX: Using computer’s COM5 to link to μPAC-5307. You need to change C1 to C5.
5.
Switch the “Init*” to “ON” then power it up.
6.
If the connection is OK, “uPAC-5001>” messages will appear on the screen.
Start the Baud Rate Setting:
7.
Type
"isa5307 *b=n"
to set baud rate of COM1. "n" is the setting code, n = 0 ~ 9.
1=2400,
2=4800,
3=9600,
4=19200,
5=38400,
6=57600,
7=115200,
8=300,
9=600,
0=1200
8.
Switch the “Init*” to “OFF” then power it up.
Please type the instruction according to
the controller model. (Ex. isa
5307
*b=3)
C1
B115200 P0 D8 S1
F
Xautoexec.bat Xisa5307.exe
w25
C5
B115200 P0 D8 S1
F
Xautoexec.bat Xisa5307.exe
w25
PC/HMI
RxD
TxD
GND
PWR1
P.GND
CA0910
OFF
ON