I-7530, I-7530A, I-7565, I-7530-FT, tM-7530, tM-7530A, tM-7565 User Manual Version 1.6
Page:
12
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
1.2 Communication Mode Description
The CAN converter supports three communication modes with Normal mode, Pair
connection mode and Listen only mode as below descripption. In addition, please refer
to section 3.4 for the setting method of the communication mode. If you need to use the
COM port software during the test, please refer to section 5.7.
1.2.1 Normal mode
After inputting a fixed-format "UART command string" from the UART side of the
CAN converter, the CAN converter will respond whether the command is valid. If the
command is valid, it will output the data to the CAN side, but if the command is invalid,
it will not act. Conversely, when data be inputed from the CAN side of the CAN
converter, the CAN converter will also output a fixed-format "UART command string" to
the UART side as below figure. For the detailed command format, please refer to the
UART command string table in chapter 4.
