ICP DAS USA FSM-510G series Скачать руководство пользователя страница 77

Страница: 77 / 298

Command Descriptions

2.3.44 Access Control List

Object

Description

Ingress Port

Indicates the ingress port of the ACE. Possible values are:

All

: The ACE will match all ingress port.

Port

: The ACE will match a specific ingress port.

Policy / Bitmask

Indicates the policy number and bitmask of the ACE.

Frame Type

Indicates the frame type of the ACE. Possible values are:

Any

: The ACE will match any frame type.

EType

: The ACE will match

Ethernet Type

frames. Note that an Ethernet Type based

ACE will not get matched by IP and ARP frames.

ARP

: The ACE will match ARP/RARP frames.

IPv4

: The ACE will match all IPv4 frames.

IPv4/

ICMP

: The ACE will match IPv4 frames with ICMP protocol.

IPv4/

UDP

: The ACE will match IPv4 frames with UDP protocol.

IPv4/

TCP

: The ACE will match IPv4 frames with TCP protocol.

IPv4/Other

: The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.

IPv6

: The ACE will match all IPv6 standard frames.

Action

Indicates the forwarding action of the ACE.

Permit

: Frames matching the ACE may be forwarded and learned.

Deny

: Frames matching the ACE are dropped.

Filter

: Frames matching the ACE are filtered.

Rate Limiter

Indicates the rate limiter number of the ACE. The allowed range is

. When

Disabled

is displayed, the rate limiter operation is disabled.

Port Redirect

Indicates the port redirect operation of the ACE. Frames matching the ACE are

redirected to the port number. The allowed values are

Disabled

or a specific port

number. When

Disabled

is displayed, the port redirect operation is disabled.

Mirror

Specify the mirror operation of this port. Frames matching the ACE are mirrored to the

destination mirror port. The allowed values are:

Enabled

: Frames received on the port are mirrored.

Disabled

: Frames received on the port are not mirrored.

The default value is "Disabled".

Counter

The counter indicates the number of times the ACE was hit by a frame.

Modification Buttons

You can modify each ACE (Access Control Entry) in the table using the following

Содержание FSM-510G series











































































































































































































































































































Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA FSM-510G series, Руководство пользователя

Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды