ICP DAS USA FSM-510G series, Руководство пользователя

Страница: 47 / 298

Command Descriptions
47
SNMP v1
: Set SNMP trap supported version 1.
SNMP v2c
: Set SNMP trap supported version 2c.
SNMP v3
: Set SNMP trap supported version 3.
Trap Community Indicates the community access string when sending SNMP trap packet. The allowed
string length is 0 to 255, and the allowed content is ASCII characters from 33 to 126.
Trap Destination
Address
Indicates the SNMP trap destination address. It allow a valid IP address in dotted
decimal notation ('x.y.z.w').
And it also allow a valid hostname. A valid hostname is a string drawn from the
alphabet (A-Za-z), digits (0-9), dot (.), dash (-). Spaces are not allowed, the first
character must be an alpha character, and the first and last characters must not be a
dot or a dash
Trap Destination IIPv6
Address
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit records
represented as eight fields of up to four hexadecimal digits with a colon separating
each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of
contiguous zeros; but it can appear only once. It can also represent a legally valid
IPv4 address. For example, '::192.1.2.34'.
Trap Authentication
Failure
Indicates that the SNMP entity is permitted to generate authentication failure traps.
Possible modes are:
Enabled
: Enable SNMP trap authentication failure.
Disabled
: Disable SNMP trap authentication failure.
Trap Link-up and
Link-down
Indicates the SNMP trap link-up and link-down mode operation. Possible modes are:
Enabled
: Enable SNMP trap link-up and link-down mode operation.
Disabled
: Disable SNMP trap link-up and link-down mode operation.
Trap Inform Mode Indicates the SNMP trap inform mode operation. Possible modes are:
Enabled
: Enable SNMP trap inform mode operation.
Disabled
: Disable SNMP trap inform mode operation.
Trap Inform Timeout
(seconds)
Indicates the SNMP trap inform timeout. The allowed range is
0
to
2147
.
Trap Inform Retry Times Indicates the SNMP trap inform retry times. The allowed range is
0
to
255
.
Trap Probe Security
Engine ID
Indicates the SNMP trap probe security engine ID mode of operation. Possible values
are:
Enabled
: Enable SNMP trap probe security engine ID mode of operation.
Disabled
: Disable SNMP trap probe security engine ID mode of operation.
Trap Security Engine ID Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using
USM for authentication and privacy. A unique engine ID for these traps and informs is
needed. When "Trap Probe Security Engine ID" is enabled, the ID will be probed