ICP DAS USA FSM-510G series Скачать руководство пользователя страница 203

Страница: 203 / 298

Command Descriptions

203

Buttons

Click to refresh the page immediately.

Object

Description

Receive Total and Transmit Total

Rx and Tx Packets

The number of received and transmitted (good and bad) packets.

Rx and Tx Octets

The number of received and transmitted (good and bad) bytes. Includes FCS, but

excludes framing bits.

Rx and Tx Unicast

The number of received and transmitted (good and bad) unicast packets.

Rx and Tx Multicast

TThe number of received and transmitted (good and bad) multicast packets.

Rx and Tx Broadcast

The number of received and transmitted (good and bad) broadcast packets.

Rx and Tx Pause

A count of the MAC Control frames received or transmitted on this port that have an

opcode indicating a PAUSE operation.

Receive and Transmit Size Counters

The number of received and transmitted (good and bad) packets split into categories based on their

respective frame sizes.

Receive and Transmit Queue Counters

The number of received and transmitted packets per input and output queue.

Receive Error Counters

Rx Drops

The number of frames dropped due to lack of receive buffers or egress congestion.

Rx CRC/Alignment

The number of frames received with CRC or alignment errors.

Rx Undersize

The number of short

frames received with valid CRC.

Rx Oversize

The number of long

frames received with valid CRC.

Rx Fragments

The number of short

frames received with invalid CRC.

Rx Jabber

The number of long

frames received with invalid CRC.

Rx Filtered

The number of received frames filtered by the forwarding process.

Short frames are frames that are smaller than 64 bytes.

Long frames are frames that are longer than the configured maximum frame

length for this port.

Transmit Error Counters

Tx Drops

The number of frames dropped due to output buffer congestion.

Tx Late/Exc. Coll

The number of frames dropped due to excessive or late collisions.

Содержание FSM-510G series











































































































































































































































































































Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA FSM-510G series, Руководство пользователя

Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды