ICP DAS USA FSM-510G series Скачать руководство пользователя страница 27

Страница: 27 / 298

Command Descriptions

Object

Description

Port

This is the logical port number for this row.

Link

The current link state is displayed graphically. Green indicates the link is up and red

that it is down.

Current Link Speed

Provides the current link speed of the port.

Configured Link Speed

Selects any available link speed for the given switch port. Only speeds supported by

the specific port is shown. Possible speeds are:

Disabled

- Disables the switch port operation.

Auto

- Port auto negotiating speed with the link partner and selects the highest speed

that is compatible with the link partner.

10Mbps HDX

- Forces the cu port in 10Mbps half duplex mode.

10Mbps FDX

- Forces the cu port in 10Mbps full duplex mode.

100Mbps HDX

- Forces the cu port in 100Mbps half duplex mode.

100Mbps FDX

- Forces the cu port in 100Mbps full duplex mode.

1Gbps FDX

- Forces the port in 1Gbps full duplex .

Flow Control

When

Auto Speed

is selected on a port, this section indicates the flow control

capability that is advertised to the link partner.

When a fixed-speed setting is selected, that is what is used. The Current Rx column

indicates whether pause frames on the port are obeyed, and the Current Tx column

indicates whether pause frames on the port are transmitted. The Rx and Tx settings

are determined by the result of the last

Auto-Negotiation

Check the configured column to use flow control. This setting is related to the setting

for Configured Link Speed.

Maximum Frame Size

Enter the maximum frame size allowed for the switch port, including FCS.

Excessive Collision Mode

Configure port transmit collision behavior.

Discard

: Discard frame after 16 collisions (default).

Restart

: Restart backoff algorithm after 16 collisions.

Buttons

Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

Click to refresh the page. Any changes made locally will be undone.

Содержание FSM-510G series











































































































































































































































































































Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA FSM-510G series, Руководство пользователя

Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды