ICP DAS USA FSM-510G series Скачать руководство пользователя страница 235

Страница: 235 / 298

Command Descriptions

235

2.4.41 History

Object

Description

History Index

Indicates the index of History control entry.

Sample Index

Indicates the index of the data entry associated with the control entry.

Sample Start

The value of sysUpTime at the start of the interval over which this sample was

measured.

Drop

The total number of events in which packets were dropped by the probe due to lack of

resources.

Octets

The total number of octets of data (including those in bad packets) received on the

network.

Pkts

The total number of packets (including bad packets, broadcast packets, and multicast

packets) received.

Broadcast

The total number of good packets received that were directed to the broadcast

address.

Multicast

The total number of good packets received that were directed to a multicast address.

CRCErrors

The total number of packets received that had a length (excluding framing bits, but

including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad

Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad

FCS with a non-integral number of octets (Alignment Error).

Undersize

The total number of packets received that were less than 64 octets.

Oversize

The total number of packets received that were longer than 1518 octets.

Frag.

The number of frames which size is less than 64 octets received with invalid CRC.

Jabb.

The number of frames which size is larger than 64 octets received with invalid CRC.

Coll.

The best estimate of the total number of collisions on this Ethernet segment.

Utilization

The best estimate of the mean physical layer network utilization on this interface

during this sampling interval, in hundredths of a percent.

Buttons

Check this box to refresh the page automatically. Automatic refresh occurs

every 3 seconds.

Содержание FSM-510G series











































































































































































































































































































Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA FSM-510G series, Руководство пользователя

Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды