ICP DAS USA FSM-510G series Скачать руководство пользователя страница 222

Страница: 222 / 298

222

Info

information is available for the following

administrative states

• Port-based 802.1X

• Single 802.1X

• Multi 802.1X

• MAC-based Auth.

Selected Counters

The Selected Counters table is visible when the port is in one of the following

administrative states

• Multi 802.1X

• MAC-based Auth.

The table is identical to and is placed next to the

Port Counters

table, and will be

empty if no MAC address is currently selected. To populate the table, select one of the

attached MAC Addresses

from the table below.

Attached MAC Addresses

Identity

Shows the identity of the supplicant, as received in the Response Identity EAPOL

frame.

Clicking the link causes the supplicant's EAPOL and Backend Server counters to be

shown in the Selected Counters table. If no supplicants are attached, it shows No

supplicants attached.

This column is not available for MAC-based Auth.

MAC Address

For Multi 802.1X, this column holds the MAC address of the attached supplicant.

For MAC-based Auth., this column holds the MAC address of the attached client.

Clicking the link causes the client's Backend Server counters to be shown in the

Selected Counters table. If no clients are attached, it shows No clients attached.

VLAN ID

This column holds the VLAN ID that the corresponding client is currently secured

through the Port Security module.

State

The client can either be authenticated or unauthenticated. In the authenticated state, it

is allowed to forward frames on the port, and in the unauthenticated state, it is

blocked. As long as the backend server hasn't successfully authenticated the client, it

is unauthenticated. If an authentication fails for one or the other reason, the client will

remain in the unauthenticated state for

Hold Time

seconds.

Last Authentication

Shows the date and time of the last authentication of the client (successful as well as

unsuccessful).

Buttons

Check this box to refresh the page automatically. Automatic refresh occurs every 3

Содержание FSM-510G series











































































































































































































































































































Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA FSM-510G series, Руководство пользователя

Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды