ICP DAS USA FSM-510G series Скачать руководство пользователя страница 19

Страница: 19 / 298

Command Descriptions

IP Routes

Delete

Select this option to delete an existing IP route.

Network

The destination IP network or host address of this route. Valid format is

dotted

decimal notation

or a valid IPv6 notation. A default route can use the value

0.0.0.0

or IPv6

notation.

Mask Length

The destination IP network or host mask, in number of bits (prefix length). It defines

how much of a network address that must match, in order to qualify for this route.

Valid values are between 0 and 32 bits respectively 128 for IPv6 routes. Only a

default route will have a mask length of

(as it will match anything).

Gateway

The IP address of the IP gateway. Valid format is

dotted decimal notation

or a valid

IPv6 notation. Gateway and Network must be of the same type.

Next Hop VLAN(Only for IPv6)

The VLAN ID (VID) of the specific IPv6 interface associated with the gateway.

The given VID ranges from 1 to 4094 and will be effective only when the

corresponding IPv6 interface is valid.

If the IPv6 gateway address is link-local, it must specify the next hop VLAN for the

gateway.

If the IPv6 gateway address is not link-local, system ignores the next hop VLAN for

the gateway.

Buttons

Click to add a new IP interface. A maximum of 8 interfaces is supported.

Click to add a new IP route. A maximum of 32 routes is supported.

Click to save changes.

Click to revert to previously saved values.

Содержание FSM-510G series











































































































































































































































































































Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA FSM-510G series, Руководство пользователя

Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды