ICP DAS USA FSM-510G series Скачать руководство пользователя страница 138

Страница: 138 / 298

138

Emergency Call Service

Emergency Call Service ELIN identifier data format is defined to carry the ELIN

identifier as used during emergency call setup to a traditional CAMA or ISDN

trunk-based PSAP. This format consists of a numerical digit string, corresponding to

the ELIN to be used for emergency calling.

Policies

Delete

Check to delete the policy. It will be deleted during the next save.

Policy ID

ID for the policy. This is auto generated and shall be used when selecting the policies

that shall be mapped to the specific ports.

Application Type

Intended use of the application types:

1. Voice - for use by dedicated IP Telephony handsets and other similar appliances

supporting interactive voice services. These devices are typically deployed on a

separate VLAN for ease of deployment and enhanced security by isolation from data

applications.

2. Voice Signalling (conditional) - for use in network topologies that require a

different policy for the voice signalling than for the voice media. This application type

should not be advertised if all the same network policies apply as those advertised in

the Voice application policy.

3. Guest Voice - support a separate 'limited feature-set' voice service for guest users

and visitors with their own IP Telephony handsets and other similar appliances

supporting interactive voice services.

4. Guest Voice Signalling (conditional) - for use in network topologies that require a

different policy for the guest voice signalling than for the guest voice media. This

application type should not be advertised if all the same network policies apply as

those advertised in the Guest Voice application policy.

5. Softphone Voice - for use by softphone applications on typical data centric

devices, such as PCs or laptops. This class of endpoints frequently does not support

multiple VLANs, if at all, and are typically configured to use an 'untagged' VLAN or a

single 'tagged' data specific VLAN. When a network policy is defined for use with an

'untagged' VLAN (see Tagged flag below), then the L2 priority field is ignored and only

the DSCP value has relevance.

6. Video Conferencing - for use by dedicated Video Conferencing equipment and

other similar appliances supporting real-time interactive video/audio services.

Содержание FSM-510G series











































































































































































































































































































Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA FSM-510G series, Руководство пользователя

Результаты поиска

Содержание FSM-510G series

Отзывы:

Бренды по названию

Популярные бренды