ICP DAS USA CAN-2084C, Руководство пользователя приложения

Страница: 10 / 36

CAN-2084C
User’s Manual (Version 1.00, Sep/2018) ------------- 10
2.3 LED Description
Power LED
The CAN-2084C needs a 10V~30VDC power supply. Under a normal
connection, a good power supply and a correct voltage selection, as the unit it turned
on, the LED will light up in red.
Run LED
The Run LED indicates the CANopen operation state. The description of the
LED state is shown below. About the details, please refer to the section 2.3.1 of the
CAN-2000C user manual.
LED Signal State Description
No Light Non-power Power Supply is not ready
Single Flash Stopped The device is in Stopped state
Blinking Pre-operation
The device is in the pre-
operation state
Continuing Light Operation
The device is in the operational
state
Error LED
The Error LED indicates the CANopen error state. The description of the
LED state is shown below. About the details, please refer to the section 2.3.2 of the
CAN-2000C user manual.
LED Signal State Description
No Light Non error Device is in working condition
Single Flash Error Warning
At least one error of the CAN
controller has occurred
Blinking Guarding fail Guard event happened
Continuing Light Bus Off The CAN controller is bus off
Terminal Resistor LED
When the switch of the 120Ω terminal resistor is turned on, the terminal
resistor LED will be lightening.