background image

KDP-603/603A User

s Manual for Operation and Installation 

Interphone 

for Apartment Unit 

KDP-603    O0808

This manual is based on the date as shown in the right and specifications 

are subject to change without notice for quality improvement.

PRODUCT
MODEL 
DATE PURCHASED
WARRANTY PERIOD
AGENCY ADDRESS

KOCOM Warranties the original purchaser of this product 

as follows.

1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect, KOCOM  

will repair it within one year from date  of purchase free of charge.

3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment,  by consumer.
b. Breakdown cause by unauthorized repair, or system  modification.
c. Breakdown caused by natural disaster or power disorder. 

Warranty 

Warranty Card 

To receive after-Sale service, have the following ready

when you contact our branches

1. Name of the product
2. Model number of the product
3. The area of problem
4. Phone number and address at     

which you can be contacted.

Interactive call and communication between house and guardroom. 

Communication with lobby phone and door open function.

Thank you very much 

for purchasing KOCOM 

video doorphone. 

please read this manual 

thoroughly to ensure 

correct usage, before 

operating. 

Содержание KDP-603











Отзывы: