2014-08-04
51 | P a g e
Setting Your Alert
Preferences as discussed in Chapter 2.
4.
Disable any alerts that you are not using from the
Alerts Setup
screen. Use your mouse cursor and click
Settings
and then
Alert Setup
.
Enabling/Disabling Alerts
-
to disable an alert, deselect the checkbox in the far left column. This will
prevent the alert from being posted to the
Home
page.
Q.
How do I determine the software version of my employee time clock?
A.
Your current time clock software version can be found under
Help | About Your Clock
. Compare your Software
Version with the software version posted on our website.
SB-100 PRO 2.5 Universal Time Clock -
www.icontime.com/universal_time_clock_update
Q.
Why can't I access my network time clock?
A.
If the clock was assigned a dynamic IP Address, this address may have changed if the router reboots or your time clock
is unplugged from the power. To assign a Static IP Address, follow the instructions below.
1.
First determine an available IP Address for the employee time clock. Your network supervisor can provide you with
this information or help with these steps.
2.
Enter into Supervisor Mode at your employee time clock terminal.
Press
on the time clock.
Enter in your security code - the default security code is
00 00 00
.
3.
Scroll through the options using
Up
or
Down
until you find the option
View IP Address
- press
Enter.
4.
The current IP Address of the clock will appear. Press
Enter
again.
5.
Enter the desired IP Address including leading zeros.
Example: 192.168.002.528
Note:
If the clock is on the same local subnet as your computer, you should not have to change the settings for
subnet mask, gateway, or DNS server. Your network supervisor will know how to set this up if needed.
6.
A message should appear on the clock
IP Address set successfully
.
Press
Clear
to exit Supervisor Mode.
7.
Unplug the power to the clock for a few seconds and plug it back in. Allow the clock to reboot.
8.
Open a Web browser on your computer and in the address bar type in the IP address of the clock to log into the
time clock.