2014-08-04
46 | P a g e
Assign a Static IP Address to the Time Clock
Assign a static IP address to the time clock along with the subnet mask, gateway address and DNS address. Your Network
Administrator should be able to provide you with this information.
Determine an available IP address to be assigned to the time clock.
1.
Enter into Supervisor Mode at your employee time clock terminal.
2.
Press
on the time clock.
Enter in your security code - the default security code is "00 00 00".
Scroll through the options using or until you find the option View IP Address - press
Enter.
3.
The current IP address of the clock will appear. Press
Enter
again.
4.
Enter the desired IP address including leading zeros. Press
Enter
.
5.
Example:
92.168.004.155
Enter the Subnet Mask - press
Enter
.
6.
Example:
255:255:255:000
Enter the Gateway address - press
Enter.
7.
Example:
192.168.004.001
Enter the DNS address of your network - press
Enter.
8.
Example:
192.168.004.001
Press
Clear
to exit out of Supervisor Mode.
9.
Open a Web browser on a computer in the same local network, in the address bar type in the IP address of the clock to
10.
log into the time clock.
Set Up Port Forwarding on the Router
These instructions are general guidelines for configuring a router for port-forwarding. Actual steps required may vary with each
router. For instructions on configuring your specific router, go to the website www.portforward.com and select your router brand
and model, or contact your router’s manufacturer.
If you are using both a router and a cable modem router/DSL modem router, port forwarding must be configured on both the router
and cable modem router/DSL modem router. Alternatively you may contact your ISP to disable the router function on your cable
modem router/DSL modem router.
Open a web browser like Internet Explorer or Firefox. Enter the internal/local IP address of your router in the address
1.
bar of your browser.
If you do not know your routers internal/local IP address, refer to
How To Find Your Routers IP Address
guide
(
http://portforward.com/networking/routers_ip_address.htm
).
Examples:
192.168.1.1 and 192.168.0.1
HINT:
It should be the same as the Default Gateway number entered in step 7 of the “Assign a Static IP Address
to the Time Clock” section above.
