12
13
13. Set the Hand Weights (59) in the Weight
Rests (11, 12).
59
59
11, 12
12
Avoid pinching
the wires
12. Connect the connectors on the Console Wire (I)
to the connectors on the Mount Wire (91).
Tip:
The wire connectors should slide together
easily and snap into place with an audible
click. If they do not, turn one connector and
try again.
Next, insert the connectors into the Console
Mount (5), and then press the Wire Protector
(83) into the Console Mount.
Tip: It may be
helpful to insert the connectors into the
Console Mount one at a time.
Tip: Avoid pinching the wires. If necessary,
tilt the Console Bracket (26) upward to
make this step easier.
Attach the Console (6)
to the Console Bracket with four M4 x 16mm
Screws (81);
start all the Screws, and then
tighten them.
26
I
6
81
81
5
83
91