2
PANEL DESCRIPTION
2-10
Assignable Software key functions (Continued)
RX Speaker
(For the Mobile type transceivers)
Push to turn the RX Speaker function ON or OFF.
L
When the RX Speaker function is turned ON, the received
audio can be heard through an external speaker that is
connected to the D-sub 25-pin connector.
NOTE:
• This function is usable when an external speaker
that is connected to the D-sub 25-pin connector.
• This function is useful when the user is out of the
vehicle.
• The audio output level is linked to the transceiver’s
volume control.
Light
Push to turn ON the backlight for about 5 seconds,
even if the backlight setting is OFF.
Lock
Hold down for 1 second to turn the Key Lock function
ON or OFF.
L
All assignable keys except the following are electronically
locked: [Monitor], [Light], [Lock], [Emergency], and
[Surveillance]. Also, [PTT] and [Power] are usable.
Lone Worker
Push to turn the Lone Worker function ON or OFF.
L
Ifnooperationoccursduringthespecifiedperiod,the
Lone Worker function automatically makes the transceiver
enter the Emergency mode.
NOTE:
To use the Lone Worker function, set the
related settings using the programming software.
High/Low
Push to select the transmit output power level
temporarily or permanently, depending on the
presetting.
Tone/RAN CH Select
In the Analog mode
Push to display the C.Tone channel select screen.
Then push [CH Up] or [CH Down] to select a tone
frequency or code. After selecting, push this key again
to save.
In the Digital mode
Push to display the RAN channel select screen. Then
push [CH Up] or [CH Down] to select a RAN code.
After selecting, push this key again to save.
C.Tone CH Ent
In the Analog mode
Push to display the C.Tone channel select screen.
Then push [CH Up] or [CH Down] to select a tone
frequency or code. After selecting, push this key again
to save.
Talk Around
Push to turn the Talk Around function ON or OFF.
L
The Talk Around function equalizes the transmit
frequency to the receive frequency, for direct (Simplex)
communication.
Wide/Narrow
In the Analog mode
Push to temporarily set the channel width to Wide* or
Narrow.
* The Wide channel width is not usable for the USA version
transceivers.
Emergency
1. Hold down during the Emer SW ON Timer period
to enter the Emergency mode.
2. After the Start Timer period has passed, an
Emergency call is automatically transmitted once,
or repeatedly.
NOTE:
Set the related settings using the programming
software.
L
Hold down during the Emer SW OFF Timer
period to cancel the Emergency function, before
transmitting an Emergency call.
Surveillance
Push to turn the Surveillance function ON or OFF.
L
When this function is turned ON, the beep is not heard
and the backlight and the Status indicator do not light,
even when a signal is received, or a key is pushed.
Scrambler/Encryption
In the Analog mode
Push to turn the Voice Scrambler function ON or OFF.
L
The Voice Scrambler function provides private
communication between stations by using a scrambled
code.
In the Digital mode
Push to turn the Encryption function ON or OFF.
L
The Voice or Data Encryption function provides private
communication between stations by using an Encryption
Key and Key ID.
Previous view