7
NXDN™ OPERATION
7-24
Transmitting a call (Continued)
D
Transmitting a Remote Monitor call
You can send a signal that requires the target station
to transmit the microphone audio.
<Menu operation>
TIP:
The Portable type transceiver’s operations are
described in
red
. And the Mobile type transceiver’s
operations are described in
blue
.
L
The common operations are in black.
(MENU > CONTACT >
REMOTE MONI
)
1. Push [Menu] to display the Menu screen.
•“CONTACT” is selected.
Portable
ENT
BACK
CONTACT
Mobile
M E N U
C O N T A C T
2. Push
[P1](ENT)
or
[P2]
.
•
The current call type is briefly displayed, then the
Contact menu screen is displayed.
L
To change the call type, see page 7-3.
3. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select the destination ID, then push
[P1](ENT)
or
[P2]
.
Portable
CONTACT 1
Station1
ENT
BACK
1
Mobile
C O N T A C T
1
S t a t i o n 1
TIP:
If “DIRECT DIAL” is selected, you can
manually enter a target ID. See page 7-32 for
details.
NOTE:
When the call type is “Talkgroup,” the
Remote Monitor call cannot be sent.
4. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select “REMOTE MONI.”
Portable
Station1
REMOTE MONI
TX
BACK
Mobile
S t a t i o n 1
R E M O T E
M O N I
5. Hold down
[P1](TX)
or
[P2]
for 1 second to
transmit the Remote Monitor call.
• “REM TX” is displayed while transmitting.
L
When the call type is “Talkgroup,”
[P1](TX)
or
[P2]
is
disabled.
6. When an acknowledgment is received, “REM
ACK” is displayed.
L
“REM FAIL” is displayed if the target station does not
send back an acknowledgement.
Previous view
