Icom iF4261DT, Руководство по эксплуатации

Страница: 90 / 99

7
NXDN™ OPERATION
7-35
Displaying the Call log
D
The received Call log
The transceiver saves a log of the received voice
calls (for Individual), Call Alert calls, Status messages,
and Messages in the memory, depending on the
presetting.
<Menu operation>
To display the received voice call (for Individual) or
Call Alert call logs, follow the procedures as described
below.
TIP: The Portable type transceiver’s operations are
described in red . And the Mobile type transceiver’s
operations are described in blue .
L
The common operations are in black.
(MENU > CALL LOG > RECEIVED )
1. Push [Menu] to display the Menu screen.
2. Push [P2](
Ω
) or [P3](
≈
) or [
Ω
P3] or [P4
≈
] to
select “CALL LOG,” then push [P1](ENT) or [P2] .
3. Push [P2](
Ω
) or [P3](
≈
) or [
Ω
P3] or [P4
≈
] to
select “RECEIVED,” then push [P1](ENT) or [P2] .
Portable
CALL LOG
RECEIVED
ENT BACK
Mobile
C A L L L O G
R E C E I V E D
4. Push [P2](
Ω
) or [P3](
≈
) or [
Ω
P3] or [P4
≈
] to view
the log.
Portable
VOICE CALL
Station1
BACK
Mobile
V O I C E C A L L
S t a t i o n 1
L
"NO LOG" is displayed when the memory has no log.
5. Push [P0](BACK) or [P1] several times until you
return to the Standby mode.
Up to 10 calls (RX/TX) can be saved in the Call log,
and the oldest call record is erased when an 11th call
is received. However, once the transceiver is turned
OFF, the all records are erased.
<Menu operation>
To display the received Status message or Message
logs, follow the procedures as described below.
(MENU > MESSAGE > RECEIVED MSG )
1. Push [Menu] to display the Menu screen.
2. Push [P2](
Ω
) or [P3](
≈
) or [
Ω
P3] or [P4
≈
] to
select “MESSAGE,” then push [P1](ENT) or [P2] .
3. Push [P2](
Ω
) or [P3](
≈
) or [
Ω
P3] or [P4
≈
] to
select “RECEIVED MSG,” then push [P1](ENT) or
[P2] .
Portable
MESSAGE
RECEIVED MSG
ENT BACK
Mobile
M E S S A G E
R E C E I V E D
M S G
4. Push [P2](
Ω
) or [P3](
≈
) or [
Ω
P3] or [P4
≈
] to view
the log.
Portable
Hello!
Station1
BACK
Mobile
H e l l o !
S t a t i o n 1
L
"NO LOG" is displayed when the memory has no log.
5. Push [P0](BACK) or [P1] several times until you
return to the Standby mode.
Previous view