![background image](http://html1.mh-extra.com/html/icom/id-51a/id-51a_advanced-manual_2038182047.webp)
5
BASIC OPERATION
5-13
■
Band Scope function
The Band Scope function allows you to visually check a spec-
ified frequency range around the center frequency.
Band Scope display
Sweep marker
Strong level
Weak level
The signal on the
146.060 MHz
D
Sweep operation
q
Push [QUICK]
to open the Quick Menu screen.
w
Push D-pad(
) to select “Band Scope,” and then
push D-pad(Ent).
D-pad
(
)
(Ent)
e
Push D-pad(
) to select the option between “Single
Sweep” and “Continuous Sweep.”
r
Push D-pad(Ent) to return to the frequency display
and start sweeping.
• A single Sweep checks the specified frequency range
only one time.
• A continuous Sweep repeatedly checks the specified fre-
quency range.
• Push D-pad(Ent) to stop sweeping and push again to
restart it.
• When the sweeping stops, rotate [DIAL] to move the
sweep marker to a detected signal; you can hear the sig-
nal audio.
• When the sweeping stops, push [CLR]
to cancel the
Band Scope function.
Center frequency (Example: 146.010 MHz)
Example: The tuning step is set to 10 kHz, and a
strong signal is received on 146.060 MHz.
Example: Continuous sweep on 146.010 MHz
While continuously
sweeping
When the sweeping stops,
rotate [DIAL] to move the
sweep marker to a detect-
ed signal. Depending on
the presetting, you may
hear the signal audio.
About the sweep steps:
The specified tuning step (in VFO
mode) or programmed tuning step (in memory mode) is
used during a sweep. If the tuning step is set to wide, the
present signal may not be displayed (may be skipped),
even if it is strong signal. Thus we recommend to set the
tuning step to 20 kHz or less to use the Band Scope func-
tion. See page 5-7 for Tuning step selection details.
TIP:
• For the single watch operation within the 144 MHz or 430
MHz band, the displayed frequency’s audio can be heard
during a sweep.
- In the AIR band, the displayed frequency’s audio can-
not be heard during a sweep, even if the single watch
operation is selected.
• The audio output during a sweep can be turned OFF in
the MENU screen.
MENU > Sounds >
Scope AF Output
Previous view