Icom ID-51A Скачать руководство пользователя страница 95

Страница: 95 / 413

D-STAR OPERATION <BASIC>

8-24

Repeater List updating is complete!

■

Updating the Repeater List (Continued)

Push D-pad(Ent) to select the file, and then the

“Keep 'SKIP' settings in Repeater List?” appears.

D-pad

(

)

(Ent)

Push D-pad(



) to select “YES” or “NO.”

• When “YES” is selected, the skip settings of the Repeater

List are retained. (p. 9-39)

Push D-pad(Ent), “Load file?” appears.

Push D-pad(



) to select “YES,” then push D-pad(Ent)

to start the file check.

• While checking the file, “CHECKING FILE” and a prog-

ress bar are displayed.

After checking, settings data loading starts.

• While loading, “LOADING” and a progress bar are dis-

played.

After loading, “COMPLETED! Reboot the ID-51” ap-

pears.

To complete the loading, reboot the transceiver.

Previous view

Содержание ID-51A






























































































































































































































































































































































































































Результаты поиска

Содержание ID-51A

Отзывы:

Icom ID-51A, Руководство для продвинутых пользователей, Страница: 95 / 413

Результаты поиска

Содержание ID-51A

Отзывы: