![background image](http://html1.mh-extra.com/html/icom/id-51a/id-51a_advanced-manual_2038182134.webp)
9
D-STAR OPERATION <ADVANCED>
9-39
You can set unnecessary repeaters as scan skip tar-
gets. The selected repeaters are skipped during scan-
ning for faster selection and scanning.
You can set the skip setting to all repeaters in the se-
lected repeater group, or individual repeaters.
TIP:
When a repeater is set as a skip target, its “USE
(FROM)” setting is automatically set to “NO.” In this
case, the repeater cannot be selected in “FROM” (Ac-
cess repeater).
D
Individual skip setting
q
Push [MENU]
.
w
Push D-pad(
) to select the root item (“DV Memo-
ry”), and then push D-pad(Ent).
D-pad
(
)
(Ent)
e
Push D-pad(
) to select “Repeater List,” and then
push D-pad(Ent).
r
Push D-pad(
) to select the repeater group that in-
cludes the repeater you want to set the skip setting
on, and then push D-pad(Ent).
t
Push D-pad(
) to select the repeater to be skipped
during the DR scan.
y
Push [QUICK]
.
u
Push D-pad(
) to select “SKIP,” and then push D-
pad(Ent).
• “SKIP” appears on the selected repeater.
• Push [QUICK]
and select “SKIP” again, then push
D-pad(Ent) to cancel the skip setting.
• When “SKIP All ON” is selected, push D-pad(Ent) to set
all repeaters in the group as skip targets.
■
Skip settings for the DR scan
TIP:
When you select “Re-
peater List” on the FROM
SELECT screen, you can
set the skip settings in the
same way as described
above.
Select the repeat-
er to set the skip
setting
Appears
Select the repeat-
er group.
Previous view