Icom ID-51A страница 397 Скачать руководство пользователя

Страница: 397 / 413

TROUBLESHOOTING

20-3

Others

PROBLEM

POSSIBLE CAUSE

SOLUTION

REF.

Transceiver does not turn
ON.

• The battery is exhausted.

• The battery polarity is reversed.
• Loose connection of a battery pack

(case).

• Charge the battery pack, or replace the

batteries.

• Check the battery polarity in the case.
• Clean the battery terminals.

pp. 4-3, 4-4

p. 4-4
pp. 4-3, 4-4

No sound comes from the
speaker.

• Volume level is too low.

• An external speaker or a cloning cable

is connected to the [SP] jack.

• Rotate [VOL] to adjust to a desired

level.

• Check the external speaker connection

or remove the cloning cable.

p. 5-2

—

Sensitivity is too low, and
only strong signals are au-
dible.

• The coaxial cable is not connected, or

shorted. (External antenna is used)

• Check the coaxial cable connection or

replace with the new.

—

Transmitting is impossible.

• The transmit power level is set to S-

LOW, LOW1 or LOW2

• The battery is exhausted.

• The battery case is attached.

• The PTT Lock function is activated.

• The Busy Lockout function is activated.

• Set the transmit power level to HIGH.

• Charge the battery pack, or replace the

batteries.

• Use the battery pack or external DC

power, and set the transmit power level
to HIGH.

• Set the PTT Lock function to OFF in

the Function Menu.

• Set the Busy Lockout function to OFF

in the Function Menu.

p. 5-11

pp. 4-3, 4-4

pp. 4-6, 5-10

p. 16-75

No reply is received after a
call.

• The duplex is set, and the receive and

transmit frequencies are different.

• No station is in range or on the same

frequency.

• Set the simplex operation.

• Wait for a while, and try again.

p. 15-5

Transmitting using the VOX
function is impossible.

• The VOX Level is set to OFF or too low.
• The MIC Gain is too low.

• Set the VOX Level to a suitable level.
• Set the MIC Gain to a suitable level.

p. 16-77
p. 16-76

Contacting another station is
impossible.

• A different tone or code is used for the

tone/DTCS squelch.

• Check the tone/DTCS by performing a

tone scan.

p. 13-2

Frequency cannot be set.

• The Key Lock function is activated.

• The memory mode, Call channel mode,

Weather channel mode* or DR function
is selected.

*USA version transceiver only

• Hold down [LOCK]

for 1 second to

cancel the Key Lock function.

• Push [V/MHz]

to select the VFO

mode.

p. 5-12

p. 5-10

A Program Scan does not
start.

• The memory mode, Call channel mode,

Weather channel mode* or DR function
is selected.

*USA version transceiver only
•

The same frequency has been pro-
grammed in the scan edge channels,
“

✱

A” and “

✱

B.”

• Only one scan edge channel has been

programmed.

• Push [V/MHz]

to select the VFO

mode.

• Program different frequencies in the

scan edge channels.

• Program one or more pair of the scan

edge channels.

p. 5-10

p. 12-4

A Memory Scan does not
start.

• The Memory mode is not selected.

• Only one or no memory channel has

been programmed.

• Push [M/CALL]

to select the Mem-

ory mode.

• Program two or more memory chan-

nels.

p. 5-10

p. 12-4

The displayed frequency is
erroneous.

• The CPU has malfunctioned.
• External factors have caused a fault.

• Reset the transceiver.
• Remove and reattach the battery pack/

case.

p. 16-99
p. 1-2

Previous view

Содержание ID-51A






























































































































































































































































































































































































































Результаты поиска

Содержание ID-51A

Отзывы:

Похожие инструкции для ID-51A

Бренды по названию

Популярные бренды

Icom ID-51A, Руководство для продвинутых пользователей

Результаты поиска

Содержание ID-51A

Отзывы:

Похожие инструкции для ID-51A

Бренды по названию

Популярные бренды