15
REPEATER AND DUPLEX OPERATIONS
15-5
■
Duplex operation (Continued)
D
Setting the duplex direction
q
Push [V/MHz]
to select the VFO mode.
w
Rotate [DIAL] to set the operating frequency.
e
Push [QUICK]
.
r
Push D-pad(
) to select “DUP,” and then push D-
pad(Ent).
D-pad
(
)
(Ent)
t
Push D-pad(
) to select “DUP–” (negative offset) or
“DUP+” (positive offset), and then push D-pad(Ent)
to save, and exit the Quick Menu screen.
• OFF : For simplex operation (the receive and transmit
frequencies are the same).
• DUP
–
: The transmit frequency shifts down from the re-
ceive frequency by the offset amount.
• DUP+ : The transmit frequency shifts up from the receive
frequency by the offset amount.
[DIAL]
■
Off band indication
If the transmit frequency is out of the amateur band, the
off band indication, “OFF,” appears on the display when
[PTT] is pushed. Check the frequency offset (p. 15-4) or
duplex direction (see above) in this case.
Push D-pad(
) to
select, then push
D-pad(Ent).
Push D-pad(
) to
select, then push
D-pad(Ent).
D
Duplex operation
q
Push [MODE]
several times to select the FM
mode.
w
Hold down [SQL] to listen on the repeater input fre-
quency.
• The transmit frequency (repeater input frequency) ap-
pears on the function display.
e
Communicate in the normal way.
While monitoring
[SQL]
Blinks
NOTE:
When the Auto repeater is ON, and the oper-
ating frequency is set out of the repeater output fre-
quency range, the duplex is automatically cancelled.
Previous view