background image

16

MENU SCREEN

16-10

NOTE:

 The default settings shown below are for the USA version.

The default settings may differ, depending on your transceiver version. 

 

Menu items and Default settings (Continued)

DV Set

Tone Control

RX Bass

RX Treble

RX Bass Boost

TX Bass

TX Treble

Cut, 

Normal

 or Boost

In this item, set infrequently changed values or functions in the DV mode.

Cut, 

Normal

 or Boost

OFF

 or ON

Cut, 

Normal

 or Boost

Cut, 

Normal

 or Boost

DESCRIPTIONS

RANGE OR VALUE (Default is shown in bold)

Sets the DV mode received audio bass filter 
level to Cut, Normal or Boost.
Sets the DV mode received audio treble filter 
level to Cut, Normal or Boost.

Turns the DV mode received audio Bass Boost 
function ON or OFF

Sets the DV mode transmit audio bass filter 
level to Cut, Normal or Boost.

Sets the DV mode transmit audio treble filter 
level to Cut, Normal or Boost.

Auto Reply

DV Data TX

OFF

, ON, Voice or Position

PTT or 

Auto

Selects the Automatic Reply function between 
ON, OFF, Voice and Position.
Selects manually or automatically to transmit 
low speed data.
Selects whether or not to use the DV Fast Data 
for data communication in the DV mode.
Sets the GPS data speed to slow or fast when 
the DV data is sent by using DV Fast Data.
Sets the TX delay time after releasing [PTT] 
when the “DV Data TX” is set to “PTT” and the 
DV data is sent by using DV Fast Data.

Digital Monitor

Digital Repeater Set

RX Record (RPT)

RX Call Sign Write

RX Repeater Write

DV Auto Detect

Auto

, Digital or Analog

OFF or 

ON

ALL

 or Latest Only

OFF

 or Auto

OFF

 or Auto

OFF

 or ON

Selects the DV mode RX monitoring when 
[SQL] is held down.
Turns the digital repeater setting function ON 
or OFF. This function is usable in any DV mode 
except the DR function.
Turns the RX call sign automatic write function 
ON or OFF. This function is usable in any DV 
mode except the DR function.
Turns the repeater call sign automatic write 
function ON or OFF. This function is usable in 
any DV mode except the DR function.
Turns the DV mode automatic detect function 
ON or OFF.
The transceiver can record the data of up to 50 
individual calls.

BK

OFF

 or ON

Turns the BK (Break-in) function ON or OFF. 
The BK function allows you to break into a con-
versation between two stations with call sign 
squelch enabled.

Turns the EMR (Enhanced Monitor Request) 
communication mode ON or OFF.
After turning OFF the transceiver, the EMR 
mode will be cancelled.

Sets the audio output level when an EMR mode 
signal is received.

EMR

EMR AF Level

OFF

 or ON

0~

19

~39

Fast Data

GPS Data Speed

TX Delay (PTT)

OFF

 or ON

Slow

 or Fast

OFF or 1sec~

2sec

~10sec

DV Fast Data

[RX>CS] Key

Call Sign Capture

 or RX>CS List

Selects the [RX>CS] key’s operation when held 
down.

Previous view

Содержание ID-51A






























































































































































































































































































































































































































Отзывы: